Submitter: Fred Tydeman (US)
Submission Date: 1999-10-20
Source: NCITS J11
Reference Document: N/A
Date: 2001-09-18 14:47:22
Subject: Accuracy of decimal string to/from "binary" (non-decimal) floating-point conversions
What is the accuracy of decimal string to/from "binary" (non-decimal) floating-point conversions?
What is the accuracy of hexadecimal string to/from "decimal" (non-power-of-2) floating-point conversions?
In the following, the phrase "decimal to binary" shall cover any pair of bases that are not both a power of the same number. It also shall cover both the string to internal floating-point and internal floating-point to string conversions.
There are two basic cases to consider at run-time:
For each of those basic cases, there are two generic sub-cases: base 10 to base 2 and base 2 to base 10.
220.127.116.11 The fprintf function:
Paragraph 8 on "f,F" and "e,E" conversion specifiers says: The value is rounded to the appropriate number of digits.
Does that mean round to nearest, round by truncating, round by add 0.5 and truncate, round as per the current rounding direction, or something else? Must the rounding used for f,F match the rounding used for e,E? Since there is no explicit allowance for multiple values (as there is in 18.104.22.168 Floating constants), must the value produced be as if the infinitely precise value were rounded (and the rounding produce an error less than or equal to 0.5 units in the last place (ulp) for nearest and less than 1.0 ulp otherwise)?
For round to nearest, IEEE-754 (IEC-60559) requires that the maximum error be 0.5 ulp for a large subset of its values and 0.97 ulp for all values. For the other roundings, the maximum error allowed by IEEE-754 is 1.47 ulp. The fourth committee draft (1999-09-30) of ISO/IEC 10967-2 (LIA-2) appears to require the maximum error be in the range 0.5 to 0.75 ulp. These bounds appear to apply to both directions of conversions.
22.214.171.124 The fscanf function:
Paragraph 10 discusses conversion. Paragraph 12 on "a,e,f,g" conversion specifiers discusses format. Neither discuss accuracy of the decimal to binary conversion, e.g., it is not specified.
What is the accuracy of floating-point string to internal representation conversions? Is it the same as translation time? Is it the same as strtod? Is it undefined behavior if the value is not exactly representable? Is it round to nearest? Is it affected by the current rounding mode, e.g., correctly rounded?
126.96.36.199 The strtod ... functions:
What is the required accuracy of strtod family functions? It appears to be either not specified or the same as 188.8.131.52. It appears to depend upon what paragraph 4 "interpreted as a floating constant according to the rules of 184.108.40.206" means.
Changes to 220.127.116.11 The fprintf function:
Add near paragraph 11 before Recommended practice:
The roundings used by %f, %F, %e, and %E shall be the same and shall have an accuracy of better than 1 ulp in round to nearest and better than 2 ulp in other roundings.
Changes to 18.104.22.168 The fscanf function:
In paragraph 12, "a,e,f,g" conversion specifier, add the sentence:
The accuracy of this conversion shall be no worse than that of strtold for the same subject.
Change 22.214.171.124 The strtod ... functions:
In paragraph 4, change "rules of 126.96.36.199" to "rules of 188.8.131.52 (including accuracy requirements)"
Add a third recommended practice paragraph:
Conversions done by strtod family functions and fscanf family functions of the same valid floating-point subject string shall produce the same value.
An alternative (not liked by this author) to all of the above is to add to 184.108.40.206.2 Characteristics of floating types <float.h> in paragraph 4 before "and": ", binary-decimal conversions(footnote),".
footnote: binary-decimal covers both string to internal representations and internal to string representations, and covers any pair of bases.
220.127.116.11.2 paragraph 4 (which covers the accuracy of +, -, *, /, and math library functions) does not cover decimal <--> binary conversions. Therefore, the rest of 18.104.22.168.2 covers these conversions (F.P. characteristics must meet the minimum-maximum requirements for the <float.h> parameters (even though the exact model need not be followed)). That appears to require that the actual representation be able to express >= FLT/DBL/LDBL_DIG digits precise to the last of those digits (for decimal to binary conversions) and >= DECIMAL_DIG digits (for binary to decimal conversions).
22.214.171.124 para. 1 implies that the different widths of F.P. types must have similar representations differing only in number of bits in exponent, mantissa, and padding.
In 126.96.36.199 f,F format, the value is rounded to the appropriate number of digits, which indicates that the displayed value differs from the "numerical" value only with regard to that rounding. (Of course, all the fprintf conversions of numeric values to display form are on the assumption that what is displayed is the same value as the numeric value, but in human-comprehensible form and subject to specified rounding etc.)
188.8.131.52 says that the numeric string is interpreted as a value according to the rules in 184.108.40.206 for floating constants.
Details of rounding are not specified, although certain modes are described in 220.127.116.11.2.
The latitude allowed for inexactness by the standard applies
only to precision of representation and to rounding mode.
Change 18.104.22.168.2 paragraph #4 to:
The accuracy of the floating-point operations ( +, -, *, /) and of the library functions in <math.h> and <complex.h> that return floating-point results is implementation defined, as is the accuracy of the conversion between floating-point internal representations and string representations performed by the libray routine in <stdio.h>, <stdlib.h> and <wchar.h>. The implementation may state that the accuracy is unknown.
Previous Defect Report < - > Next Defect Report